Skip to main content Skip to search Skip to main navigation

NatureWatt Pro

Product information "NatureWatt Pro"

NatureWatt Pro is the solar kit for the VW California T5, T6 and T6.1 that lets you keep your roof rack on the roof.
The modules leave room in the C-rail for roof racks up to 17 cm wide. You use solar power and roof load at the same time – with 150, 300 or 450 Wp, no drilling and no gluing.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Reviews


Full solar power. Full roof freedom.

Roof rack and solar on the roof, it works. Thanks to the special shape of the NatureWatt Pro sets, you can mount roof racks with a width of up to 17 cm. NatureWatt Pro is based on the proven NatureWatt Core – complemented by an intelligent design with integrated open spaces.

  • 150 Wp to 450 Wp output – matched to your energy needs
  • Expandable any time – start small and grow flexibly with your requirements
  • Flexibly detachable – thanks to the plug connection directly on the roof
  • Efficient, off-grid power supply just like the Core – reliable and low-maintenance
  • Optimised module layout with deliberately created open spaces
  • Plug & Play installation without complicated modifications
  • Installation without drilling or gluing – your California stays in its original condition

You gain not just energy independence — you finally use your roof twice, without compromising on output, flexibility or looks.


VW California with NatureWatt Pro solar kit 450Wp on the pop-top roof with Alpine panorama
NatureWatt Pro solar kit on the VW California, mounting profiles on the roof rail

More possibilities for your adventure.

Thanks to the open spaces between the solar modules, you can also mount a roof rack – right where you need it. Suitable for all C-rail roof racks up to 17 cm wide.

  • Carry kayaks, surfboards or bikes
  • Use roof boxes for extra storage space
  • Stay flexible for spontaneous trips and changing needs

You no longer have to choose between solar power or transport capacity, with NatureWatt Pro you get both. Perfect for anyone who wants to make the most of their California.

Three power levels

PowerSolar modulesCharge controllerWeight of the modules
150 Wp1 moduleVictron SmartSolar MPPT 75/159 kg
300 Wp2 modulesVictron SmartSolar MPPT 100/2018 kg
450 Wp3 modulesVictron SmartSolar MPPT 100/3027 kg

Scope of delivery

  • 1, 2 or 3 solar modules by WATTSTUNDE, depending on the power level
  • Victron SmartSolar MPPT charge controller, pre-mounted on a model-specific bracket
  • Mounting elements for the C-rail of the California
  • Cable set from the module to the charge controller and from the charge controller to the vehicle battery
  • Step-by-step installation guide

Tools are not included. You need three common tools.

Technical data

  • Power: 150, 300 or 450 Wp
  • Solar modules: WATTSTUNDE SOLA Flex Daylight with SunPower Maxeon cells, over 24 % efficiency
  • Module design: 4.3 mm flat, ETFE surface, 9 kg per module
  • Charge controller: Victron SmartSolar MPPT with Bluetooth, controlled via the VictronConnect app
  • Protection: exterior components at least IP67, UV-resistant, suitable for car washes
  • Roof rack: C-rail racks up to 17 cm wide
  • Vehicles: VW California T5, T6 and T6.1 – Beach, Coast and Ocean
  • Origin: developed and manufactured in Germany

Installation without drilling or gluing

  • The modules are fixed in the C-rail. Nothing is drilled or glued on the roof.
  • All contact surfaces are lined with cellular rubber and protect the paintwork.
  • The cables run behind the interior trim.
  • The charge controller sits on its bracket at existing screw positions.

Which version fits your California?

  • Without built-in cabinet (e.g. Beach): the charge controller is mounted on the driver's seat console.
  • With built-in cabinet (e.g. Coast, Ocean): the charge controller is mounted in the cabinet at the rear left.

Cable lengths and brackets are matched to the respective version.

Frequently asked questions about NatureWatt Pro

Which roof rack fits NatureWatt Pro?

Any roof rack for the C-rail of the California with a width of up to 17 cm.

Can I expand the kit later?

Yes. With the NatureWatt Pro Expansion Kit you upgrade from 150 Wp to 300 or 450 Wp. The modules are plugged in, the existing cables stay.

You can find more answers under Knowledge.

Product safety

Manufacturer
NatureWatt GmbH
Address
Bergham 55, 83624 Otterfing, Germany
Email
Item number
A010099

Safety and installation notes

  • Installation in accordance with the enclosed installation instructions.
  • Observe correct polarity (+/−); reverse polarity can damage the charge controller and the battery.
  • Fuse protection as specified in the installation instructions; do not bypass fuses or replace them with higher-rated ones.
  • Follow the connection sequence in the installation instructions: connect the solar modules only after the charge controller has been fully wired.
  • Before every journey, check that the modules and their mounting are secure; observe the permitted roof load and the vehicle height.
  • Do not continue to use damaged modules or cables.